TP-574

HDMI, Bidirectional RS−232 & IR over Twisted Pair Receiver

• Overview

•  | 

• Specifications

•  | 

• Applications

•  | 

• Diagram

•  | 

• Downloads

•  | 

• Video Review
• Related Products

•  | 

• Suggested cables
• Configurations

• Quick Facts Requires Shielded Twisted Pair Cable Max. Data Rate − 4.95Gbps (1.65Gbps per graphic channel) Bi−directional RS−232 & IR Rack Kit - RK-3T Close Audio RS-232 Infrared RS-232 Bidir HDMI+Audio DVI Analog Video PC Video P Router FireWire Transmitter Receiver Full compatibility list Print this page PDF Datasheet

  The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair signal and the TP−574 converts it back to HDMI, RS−232 and infrared signals.
  • Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
  • HDTV Compatible.
  • HDCP Compliant.
  • HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD.
  • 3D Pass-Through.
  • EDID PassThru - Passes EDID signals between the source and display.
  • Bidirectional RS-232 & IR Interface. - 38400 max baud rate.
  • System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
  • Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
  • DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
  • Power Connect System™ - A single connection to the transmitter powers both units.
  • Compact DigiTOOLS® - 3 units can be rack mounted side−by−side in a 1U rack space with the optional RK−3T rack adapter.