VM-114H4C

2x1:4 HDMI/Twisted Pair Switcher & Twisted Pair Distribution Amplifier

• Overview

•  | 

• Specifications

•  | 

• Applications

•  | 

• Diagram

•  | 

• Downloads

•  | 

• Video Review
• Related Products

•  | 

• Suggested cables
• Configurations

• Quick Facts Max. Data Rate − 4.95Gbps (1.65Gbps per graphic channel) I−EDIDPro™ Control, RS−232 & IR Rack Kit - RK-1 Close Audio RS-232 Infrared RS-232 Bidir HDMI+Audio DVI Analog Video PC Video P Router FireWire Transmitter Receiver Full compatibility list Print this page PDF Datasheet

  The VM−114H4C is a high−performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals (HDMI or DGKat twisted pair) and distributes it to four DGKat twisted pair outputs.
  • Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
  • HDTV Compatible.
  • HDCP Compliant.
  • DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
  • I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
  • HDMI Support - x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD (only on the TP inputs and outputs).
  • 3D Pass-Thru.
  • Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
  • System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
  • Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC−DGKat524, BC−DGKat623 or BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, source device and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
  • Active Input & Output LED Indicators.
  • Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 90m (270ft) of each other.
  • Flexible Control Options - Front panel buttons, RS−232, infrared control sensor, remote included.
  • Size - Compact size. 2 units can be rack mounted side−by−side in a 1U rack space with an optional RK−1 adapter.